HtmlAgility Packを使用して特定のフォームから入力を取得するにはどうすればよいですか? Lang:C#.net

html-agility-pack html-parsing

質問

コードはこの問題を私よりもはるかによく説明することができます。私はこれをやろうとしました。可能であれば、これらの他の方法がうまくいかなかった理由を説明してください。私はアイディアを使い果たしましたが、残念ながらHtmlAgilityPackの例はあまりありません。私は現在、より多くのアイデアを探しているドキュメントを調べています。

私が気付いたのは、.nextSiblingプロパティでした。次の兄弟やフォームの終わりが見つからなくなるまで、whileループを使ってフォームを調べることができると考えていました。

とにかく、ここにコードです:

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using HtmlAgilityPack;
using System.Collections;

namespace ConsoleApplication1
{
    class Program
    {
        static void Main(string[] args)
        {
            string source = @"
                <form name='form1' action='action1' method='method1' id='id1'>
                <input type='text1.1' name='name1.1' value='value1.1' />
                <input type='text1.2' name='name1.2' value='value1.2' />
            </form>
            <form name='form2' action='action2' method='method2' id='id2'>
                <input type='text2.1' name='name2.1' value='value2.1' />
                <input type='text2.2' name='name2.2' value='value2.2' />
            </form>
                    ";
            List<HtmlAttribute> formAttributes = new List<HtmlAttribute>();//this is what i'm wanting to get for the current form.
            /**
             * I want to end up with a list that has
             * Name: type Value: text1.1
             * Name: name Value: 1.1
             * Name: value Value: value1.1
             * Name: type Value: text1.2
             * Name: name Value: name1.2
             * Name: value Value: value1.2
             * but I am ending up with the 2nd forms values as well
             * */
            HtmlDocument htmlDoc = new HtmlDocument();
            htmlDoc.LoadHtml(source);

            var forms = htmlDoc.DocumentNode.Descendants("form");
            foreach (var form in forms)
            {
                Console.WriteLine(form.Attributes[0].Value); //simple writes the form name to the console to keep track of things

                HtmlNodeCollection inputs = form.SelectNodes("/input"); // gets all the inputs in the selected form, or so I thought. This is where the problem lies. Result: Shows both forms inputs.
                //HtmlNodeCollection inputs = form.SelectNodes("//input"); // not the best at xpath, but perhaps this could make a difference? Result: no difference
                //var inputs = form.Elements("input"); // Maybe the inputs are referred to as elements? Result: shows no input outerhtml at all.
                foreach (var input in inputs) //this has all 4 inputs from both forms. I only want it to have 2 inputs from the selected form.
                {
                    Console.WriteLine(input.OuterHtml);
                    List<HtmlAttribute> attributes = new List<HtmlAttribute>();
                    attributes = input.Attributes.ToList<HtmlAttribute>();
                    foreach (var att in attributes)
                    {
                        //add attributes to allattributes list code that will be done once problem of getting only inputs for specified form is fixed
                    }
                }
                // here comes an alternate method! Edit: Didn't work :'(
                //var inputs = form.Descendants("input"); // perhaps using the "Descendants class will make a difference. Result: Nope, didn't have any items at all!
                //IEnumerator e = inputs.GetEnumerator();
                //while (e.MoveNext())
                //{
                //    Console.WriteLine("input: " + e.Current);

                //}
                Console.WriteLine(); // Simply making everything look pretty with a newline after each form name/input outerhtml display.
            }
            Console.Read();
        }

    }
}

受け入れられた回答

私は答えを見つけた!ソリューションと説明が含まれているので、下のコードを見てください! :)

using System;
using System.Collections.Generic;
using System.Linq;
using System.Text;
using HtmlAgilityPack;
using System.Collections;

namespace ConsoleApplication1
{
    class Program
    {
        static void Main(string[] args)
        {
            string source = @"
                <form name='form1' action='action1' method='method1' id='id1'>
                <input type='text1.1' name='name1.1' value='value1.1' />
                <input type='text1.2' name='name1.2' value='value1.2' />
            </form>
            <form name='form2' action='action2' method='method2' id='id2'>
                <input type='text2.1' name='name2.1' value='value2.1' />
                <input type='text2.2' name='name2.2' value='value2.2' />
            </form>
                    ";
            List<HtmlAttribute> formAttributes = new List<HtmlAttribute>();
            IEnumerable<HtmlNode> inputs;
            /*
             * The line below is the major reason that this solution "worked" and the other didn't
             * */
            HtmlNode.ElementsFlags.Remove("form");
            /*
             * I was going through the HtmlAgilityPack forum, and stumbled upon this little tidbit of info:
             * 
             * "This is because by default, Forms are parsed as empty nodes - this is because forms are allowed to
             overlap other elements in the HTML spec.

                In other words, the following is technically legal HTML, even though it gives us developer hives:

                <table>
                <form>
                <some input elements>
                </table>
                </form>

                Here, the form overlaps the closing of the table and when properly rendered, will be contained inside the table.
                Since HtmlDocument attempts to allow this as valid without automatically correcting the HTML, HtmlDocument by default
                makes no attempt to populate the child nodes of the form.
                Ok. All that is merely an introduction. You can get around this default behavior by adding the following line:
                HtmlNode.ElementsFlags.Remove("form");
                before you make ANY use of HtmlDocument. This will allow it to parse the nodes of the form, but it sacrifices 
                the ability of the form to overlap other nodes. It will force the form to be closed properly."
             * 
             * HtmlAgilityPack didn't put the inputs as the childnode of each form because of "technically legal HTML" that could mess things up a bit,
             * so the only thing I had to do is remove the element flag! Enjoy the code below, it should be pretty self explanatory.
             * */

            HtmlDocument htmlDoc = new HtmlDocument();
            htmlDoc.OptionOutputAsXml = true;
            htmlDoc.OptionAutoCloseOnEnd = true;
            htmlDoc.LoadHtml(source);

            var forms = htmlDoc.DocumentNode.Descendants("form");
            foreach (var form in forms)
            {
                inputs = form.ChildNodes
                    .Where<HtmlNode>(a => a.OriginalName.Contains("input")); // woo hoo, finally figuring out what linq is. Sort of like mysql when I was coding php!

                Console.WriteLine(form.Attributes[0].Value + " attributes:" + Environment.NewLine + "------------------");
                foreach (var input in inputs)
                {
                    IEnumerable<HtmlAttribute> attributes;
                    attributes = input.Attributes;
                    foreach (var att in attributes)
                    {
                        Console.WriteLine("Name: " + att.Name + Environment.NewLine
                               + "Value: " + att.Value + Environment.NewLine);
                        formAttributes.Add(att);
                    }
                }
                Console.WriteLine(); // Simply making everything look pretty with a newline after each form name/input outerhtml display.
            }
            Console.Read();
        }

    }
}


ライセンスを受けた: CC-BY-SA with attribution
所属していない Stack Overflow
このKBは合法ですか? はい、理由を学ぶ
ライセンスを受けた: CC-BY-SA with attribution
所属していない Stack Overflow
このKBは合法ですか? はい、理由を学ぶ